PLEASE NOTE   We make lots of these bat wall plaques, so the one you receive will be very similar, but not necessarily the one shown. Due to the hand-made nature of the pieces there may be slight variations in size, pattern and colour, but be reassured that we only send out the finest examples.

METHOD OF CONSTRUCTION   First we hand carve the original and then cast the design in a high-density plaster. Liquid clay known as slip is created by us in our workshop and then poured into the moulds for 24 hours to set. Once removed carefully from the mould the plaques are then trimmed and decorated then left for a week to dry out fully before being fired in an electric kiln for a bisque firing at 1000°C. It will take another 24 hours for the kiln to cool down so that all the work can be emptied out and glazed. We make all our own stoneware glazes, which are dipped, poured, painted and sprayed on to our designs. Once glazed all the work goes back into the kiln for a second firing of up to 1260°C. This firing will fix the glaze permanently in to place and also make the piece frost proof and water-resistant. From start to finish this bat wall plaque can take about 2 weeks to create; whilst larger pieces can take over a month to complete.

SHOP POLICIES   For all other information including our packaging; discounts and delivery, please visit the shop policies in our ORDER section.